AIRFORCE CONDOR, TEXAN BIG BORE

To Get Pellets click here

AirForce Condor click here AirForce Talon SS click here

AirForce Accessories click here

AirForce Texan Big Bore Air Rifle

The Airforce Texan is a .458-caliber single-shot rifle that cocks via a sidelever located on the right side of the frame. It weighs 8 lbs., 3 oz., which is light for its caliber and power. The rifle is at 48 inches overall. In AirForce fashion, the reservoir is also the butt of the rifle. There’s a fill nipple on one side and a small pressure gauge on the other. The pull is adjustable, from 13-7/8 inches to about 15 inches via a sliding buttplate. The buttplate can also be rotated to the right or left for some cast-on and cast–off adjustability. The frame of the rifle is aluminum, anodized in a non-reflective matte black surface. The long, thin barrel sticks out the front of the frame an additional 9-5/8 inches. The sidelever mechanism has a single anchor point and fulcrum. When the sidelever goes forward, it opens the breech. A bullet is then laid on the loading trough and pressed forward with the thumb. After loading a bullet, the sidelever is closed. The lever goes back with very little effort! AirForce has managed to take all of the cocking effort out of the process through perfect leverage! This act of cocking and loading the rifle, which is easier than cocking a Red Ryder BB gun, is so light and smooth that it sells the rifle to many who try it. The trigger a 2-stage sporting trigger — not a target trigger that’s adjusted too light. The safety is automatic, coming on when the rifle is cocked. It can also be applied at any other time. The safety blade comes back through the front of the triggerguard, where a forward flick of the trigger finger can take it off silently. Adjustable power is 296 to 500 ft/lbs, but it isn’t called that. It’s called “tuning for the bullet.”•Precharged pneumatic•Single-shot•Sidelever•11mm dovetail•34" barrel•2-stage trigger (adj. for position only)•2.06-lb. trigger-pull•Automatic safety•Textured grip•490cc tank•Pressure-relief device•3000 psi (200 bar) max fill pressure•Adjustable power•Extended optics rail•7.65 lbs. (without scope & mount)•No baffles/is not silenced •13.875" to 15" length of pull•Buttplate can be rotated right and left for some cast-on and cast-off adjustability. Scope, rings optional

AirForce Texan Big Bore Air Rifle .45 cal 1000 ft/sec Out of stock

air condor force

AirForce Condor PCP Air Rifle, Spin-Loc Tank easily achieves 1250 in .22 making it the most powerful pellet gun known in this caliber. Premium Lothar Walther barrels insure accurate pellet delivery. With the new Spin-Loc tank and collar, you don't have to remove the gun's air reservoir to fill it. The integral scope rail has been lengthened to allow mounting the largest air gun scopes or other specialized optical sighting devices. Additional dovetail rails allow mounting lasers, bipods, and other accessories to provide the shooter with a powerful and adaptive air gun shooting system.

Specifications:
Velocity: 600-1300 feet per second .22 caliber
Power adjustment: user adjustable
Weight: 6.5lbs.
Length: 38.75 inches
Barrel: 24 inches
Trigger: 2 Stage adjustable for position
Sights: open or optical sights may be installed
Air Tank Volume: 490 CC
Precharged Pneumatic | Single-Shot | 2-Stage Trigger | Ambidextrous

AirForce Condor Gun only, no sights, no clamp .22 cal 1250 ft/sec, Spin-Loc Tank Out of stock

AirForce Condor Gun only, no sights, no clamp .25 cal 1100 ft/sec, Spin-Loc Tank Out of stock

AirForce Condor SS PCP Air Rifle, Spin-Loc Tank with a new baffle system .22 cal, scope optional Out of stock

AirForce Condor SS PCP Air Rifle, Spin-Loc Tank with a new baffle system .25 cal, scope optional Out of stock

AirForce Condor Bounty Hunter

AirForce Condor Bounty Hunter with Spin-Loc, flash suppressor & thumbhole stock. Scope, mount & bipod not included.
.22 cal 1250 ft/sec Out of stock

AirForce Condor Bounty Hunter with Spin-Loc, flash suppressor & thumbhole stock. Scope, mount & bipod not included.
.25 cal 1250 ft/sec Out of stock

AirForce 3-stage PCP Hand Pump. Pumps up to 3600 psi . AirForce 3-stage PCP Hand Pump, for AirForce Rifles, Pumps up to 3600 psi 1-year limited warranty. Fits AirForce Condor, Talon & Talon SS rifles. 1. Does not heat up with constant use 2. Requires less effort than other pumps 3. Goes up to 3,600 psi 4. Integral air pressure gauge 5. Moisture filter 6. Incl. AirForce tank adapter 7. AirForce 3-stage PCP Hand Pump, for AirForce Rifles, Pumps up to 3600 psi.
AFU1014 Out of stock

The Hill Pump is a top quality air rifle pump manufactured to ISO 9002 standards using the latest technology. Each pump is rigorously tested and backed by a twelve month warranty. Hill Pumps have been pump manufacturers since 1841. The Hill Pump comes standard with a 3300-psi (230 Bar) Gauge , precision-machined pressure chamber with Brass Fittings , heavy-duty connector Hose , Universal Adapter and a replaceable Micron Filter . The Micron Filter is a unique replaceable filter system that prevents contamination of your air rifle or pistol. The standard pump hose and connector works with FX, Falcon, Daystate and Air Arms rifles. The heavy duty construction and built-in replaceable filter is what sets the Hill pump apart. The Hill Pump with Dry Pac
The latest Patented design Hill Air Rifle Pump and Dry Air Flow System.
Approved by most leading Air Gun Manufacturers.
Dry Pac removes 90% of moisture
ISO 9001 Quality Assured
3300 psi (230 bar)
Unique Safety Bleed Valve
Rigorous Scientific Testing
Patented Pump and Dry Air Flow System
Pumps are 100% Tested
DRY-PAC Patented Dry Air Flow System

Concerned about moisture damaging your air weapon?... Not any more!

The Hill DRY-PAC moisture removal system is another new ground
breaking innovation from the manufacturers of the highly successful 2128
Series Air Compressor Pump. The Hill Dry-Pac System answers popular
concerns about moisture and hand pumps.

Unique to the market, the Hill Dry-Pac System is a patented method of
actively removing moisture utilizing a specially formulated sintered filters.
The Hill Dry-Pac has undergone lengthy and rigorous scientific testing under
laboratory conditions and will effectively remove up to 90% of the moisture
content prior to charging your PCP. Out of stock

BSA Pump with Dry-Pac Moisture Filter-Includes:

BSA Pump-Hose-BSA Fitting-Dry-Pac Filter-One Pack Filler for Dry Pac-Instructions

Out of stock

Scuba Tank Adapter, Gauge & Hose Out of stock

XS SCUBA ALUMINUM TANK 80CF

* FREE Visual Inspection Program (VIP) Included!
* Nitrox Ready up to 40% (the recreational limits of nitrox)
* Includes Pro Valve-Standard Yoke and DIN Compatible
* 3000 PSI
* Proprietary 6061-T6 alloy, a balanced aluminum-magnesium-silicon blend exclusive to Luxfer.
* 7.25 Inches in Diameter
* 26.1 Inches in Length
* Weight Empty = 31.7lbs
* Buoyancy Full = -1.9lbs
* Buoyancy Empty = 4lbs
* "Real Weight" = 35.7lbs
* COLORS:

Out of stock

Carbon Fiber Air Tank Large Tank-
Displacement: 88 cu. ft. Dry Weight: 11.3 lbs. Working Pressure: 4500 psi.
Carbon fiber filament wound over aluminum bladder . Hose has an inline gauge quick-cisconnect adapter with 1/8" BSPP male threads on one end.
Large Tank Set includes:
1-DIN Adaptor
1-1/8 mBSP X 1/8mBSP
1-Seal Washer
1-Micro bore hose
1-Valve with built in bleed body and gauge?
(eliminating the use of a yoke)

Out of stock

Airforce Quick Disconnect male adapter (not pictured) for female QD from carbon fiber tanks. Out of stock

Gun Guard - Double Size Rifle Case
Accommodates two rifles with 50mm scopes with plenty of room for accessories. Gun Guards are foam lined and impact resistant for your rifles protection, and feature four latch points and two padlock holes for added security. Case Dimensions:14-3/4" x 3-3/4" x 51-1/2" inner dim. 16" x 4" x 52-1/4" outer dim. Gun Guard - Single Rifle Case Will accommodate rifles with standard or high-mount scopes. 11-1/4" x 3-1/4" x 52-1/2" outter dim. 8 1/4" x 3" x 52" inner dim. GUG-10588
Out of stock